TPMS

The air pressure from the tires is of particular importance to the active safety of vehicle and fuel consumption. If the pressure in a car tire is below the limit specified by the manufacturer, while driving the car, then the tires will deform excessively. This deformation lead to increase in tire temperature as well as reducing transversal grip. In extreme cases, especially if the tire is at the limit of lifetime, it may disintegrate. For a long time, tire manufacturers and automotive industry experts recommend drivers regularly to check the tire pressure. This is an important aspect that results, firstly, in improving safety but also in real monay savings for car users. However, service technicians have noted that up to 2/3 of the drivers have wrong pressure parameters in their tires.

TPMS Basic Notions

WHAT IS TPMS?

TPMS – Tire Pressure Monitoring System are integrated vehicle systems, which continuously monitors tire pressure. There are two types of such systems; the direct system (measuring tire pressure via a sensor from inside the the wheel) and the indirect system (which measures pressure indirectly through the vehicle’s ABS sensor). A display from inside the the vehicle informs the driver if one or more tires lose pressure.

TPMS fulfills three functions:

  • Increased safety while driving
  • Avoiding increse fuel consumption due to wrong tire pressure
  • Avoiding tire wear caused by its reduced pressure

TPMS display

Pressure monitoring system

A too much flat tire does not offer stability so well and neither grip, in addition increases fuel consumption by up to 20-30% and one too inflated may also cause problems when braking but is more easily exposed to deterioration or even explosion.

For the system to work, all wheels have to be fitted with pressure sensors, all tyres have to be inflated to the specified air pressure and the system has to be initialised.


What are the differences between direct and indirect system?

A direct system measures tire pressure via a sensor integrated in the wheel. This information is transferred wirelessly to a control unit located inside the car. Various displays from different cars manufacturers allow the driver to always read the actual values of pressure or to receive a warning message only when the pressure in one or more tires is too low. Such systems are very accurate because monitors the pressure of the individual wheels.

How it works indirect TPMS?

In an indirect system, ABS and traction sensors, integrated in the car, monitors the rotational speed of each wheel. In situations of low tire pressure appear differences in the speed of rotation. In addition, are measured and oscillations that are pressure-dependent of the wheels through advanced processing of signals from sensors. A change in these parameters will be considered a further indication of the pressure loss.
Car tyre pressure sensor

Tire-pressure sensor

What are the advantages and disadvantages of these systems?

A direct TPMS enables very accurate collection of data and provides additional functions such as recognizing the wheel position, detecting pressure loss when the car is stopped and also monitors pressure for the spare tire.

A direct TPMS requires extra effort and expense considerably higher when replacing tires and during maintenance. All tires (summer, winter, spare) of an automobile must be equipped with a functional sensor.

An indirect TPMS is not so precise in functioning because it does not measure neither pressure and neither temperature from the tires. It also does not detect loss of pressure from the tires when the car is stationary. However, the system is much easier to maintain and less expensive because they are not using dedicated sensors in each wheel.
 board witness

TPMS-ALARM

All of the tires shows pressure drops every few months as a result of the diffusion. The tire pressure monitor warns the driver to correct in time tire pressure through a corresponding message. In the case of a significant drop in tire pressure when driving a yellow warning lamp lights up and a warning message („check tyre pressure”) will be displayed on the screen to allow the driver to take appropriate measures. In this case when lights a control witness, then recommends to inflate the wheel.

Starting from 1 November 2014: according to EU Directive all new cars should be fitted with TPMS by carmakers. However, EU Directive does not stipulates what pressure monitoring system should be used (direct or indirect – dTPMS and iTPMS).

Comments

  1. wrote on March 10th, 2020 at 11:00 am

    Alex 99

    haha, I have this on my car and I didn’t even know well what it was

  2. wrote on April 20th, 2020 at 6:59 am

    Good

    Hello. This post was extremely interesting, particularly because I was looking for essay on this subject at my school.
    Best regards,
    Thompson Leaf,

Add a comment